Skip to content
UNCLE BUCKS CAMO
GunSkins Camouflage Kits
Moon Shine Camo Products
Rolls, Sheets & Camouflage Decals
Vehicle Camouflage Seat & Steering Wheel Covers
Accent & Camo Grass Camouflage Kits
ATV, Utility Vehicle Camouflage Kits
Truck, Jeep Camouflage Kits
Perforated Window Camouflage Film
AMR Racing Graphics
Club Car Golf Cart Wraps
Yamaha Golf Cart Wrap Kits
EZ GO Golf Cart Wrap Kits
Cooking & Camping Products
Nav Menu 2
Nav Menu 3
GunSkins Camouflage Kits
Premium AR-15 Kits
List Price: $65.00
Usually Ships in 3 to 5 Days
Click to view another Camouflage Patterns
Prym 1 Black Out
Prym 1 Firestorm
Prym 1 MP
Prym 1 Shoreline
The A-15 Rifle Kit in your favorite camouflage pattern is a unique and affordable way to personalize your firearm. Made from our "NO GLARE", fade resistand material; your firearm will not only sport your favorite camouflage, it will be protected from the elements. The kit includes (14) fourteen pre-cut pieces that will easily conform to your firearm. The decals have a matte finish.
Mild Soap & Water Mixture or Isopropyl Alcohol - to clean the surface.
Lint Free Paper Towel or Cloth – to dry the surface.
Squeegee – for applying vinyl
Hobby Knife (OFLA or XACTO knife) – for trimming away excess vinyl.
Heat Gun – for heating vinyl on complicated installations.
Before Graphic Installation
For an AR-15 Rifle Kit wrap, the day before application, the rifle should be field stripped and cleaned thoroughly on all areas the camo will be applied. Making sure that no residue is on the surfaces.
Complete this process using isopropyl alcohol. Test on a small inconspicuous area to make sure it won't cause discoloration to your firearm.
Let rifle dry completely overnight to make sure you have good adhesion with the vinyl.
How to Install Your Camo Rifle Kit
Refer back to the "Before Graphic Installation" section and follow those steps.
Identify the pieces in the kit from the diagram below.
Remove vinyl pieces from the back paper liner to expose adhesive., Position camo pieces over area and lightly press down using your fingers to smooth into place. (If piece is not positioned properly, carefully remove and reposition.)
When all pieces are positioned properly and smoothed, use squeegee with firm pressure on a 45° angle to set the adhesive.
Finish trimming using light pressure with a sharp razor blade as to not scratch the finish of your gun. Stick any bubbles with a pin and re-squeegee to remove the trapped air.
Your Kit Contains
LEFT & RIGHT UPPER & LOWER RECEIVERS
LEFT & RIGHT PISTOL GRIPS
LEFT & RIGHT MAGAZINE WELLS
LEFT & RIGHT MAGAZINE
EJECTION PORT (DUST COVER)
ADDITIONAL MATERIAL FOR BUTTSTOCK, FOREND, ETC.
How to Remove
Heat the Camo with Heat gun or Hair Dryer for several seconds and continue to heat as you peel the material from the surface on a 120° angle. Any residue can be removed with a Citrus Based remover or Alcohol.
MOON SHINE CAMO® ECONOMICAL RIFLE GUN WRAP KIT - 54” x 11.5” page with 4 - Pre-Cut Pieces
PISTOL MAG KIT
MOON SHINE CAMO® ECONOMICAL SHOTGUN WRAP KIT - 54” x 11” page with 6 - Pre-Cut Pieces
Share your knowledge of this product.
Be the first to write a review »